Increase performance without replacing installed hardware.
ePMP Elevate is an innovative software solution that empowers 3rd party subscriber hardware with all the performance and scalability benefits of the ePMP platform, when co-installed with an ePMP access point.
Don't replace your hardware. Elevate it.
Transform your network
ePMP Elevate software solution allows fixed wireless broadband networks to gain the powerful signature capabilities of Cambium Networks’ ePMP platform, including frequency reuse enabled by GPS Synchronization and Smart Beamforming, even on non-Cambium 802.11n-based hardware.
The next level of network migration
Saving the cost and time of a total network replacement, an operator simply installs an ePMP Access Point and loads ePMP Elevate software onto their deployed subscriber modules.
With the upgraded features of ePMP Elevate, the life of existing infrastructure is dramatically extended to support revenue-generating applications for years to come.
ePMP Elevate networks can be managed by cnMaestro™, the cloud-based or on-premise platform that provides end-to-end management, device onboarding, and maintenance support for wireless broadband networks from a single, easy-to-use interface.
- Channel Spacing
Configurable on 5 MHz increments
- Frequency Range
5150 – 5970 MHz (exact frequencies as allowed by local regulations and underlying hardware)
- Protocols Used
IPv4, UDP, TCP, IP, ICMP, SNMPv2c, HTTPs, STP, SSH, IGMP Snooping, LLDP, DHCP, RADIUS, NTP
- Network Management
HTTPs, SNMPv2c, SSH, Cambium Networks cnMaestro™
802.1Q with 802.1p priority
- Subscribers per Sector
Up to 120
- Quality of Service
Three level priority (Voice, High, Low) with packet classification by DSCP, COS, VLAN ID, IP & MAC Address, Broadcast, Multicast and Station Priority
128-bit AES (CCMP mode)